[Zhongbo.com] The automatic glass cutting machine is generally composed of a cutting table, a cutting bridge and a computer control box. The cutting table is composed of a bracket, a table top, a conveyor belt, a transmission device, and an air cushion device. The bracket is used to support the table top, and it is composed of a steel column, a steel beam and the like. The table top is made of laminate, with 3-6 transports arranged vertically above it, and the exposed tabletops outside the conveyor belt are covered with felt.
There are many small holes in the table top, and the holes are connected with the air cushion bellows. The outer surface of the conveyor belt is usually slightly lower than the felt surface. When transporting the glass piece, lift it up by lifting the device so that its upper surface is slightly higher than the felt surface. The transmission equipment and lifting equipment of the conveyor belt are installed under the table top. The air cushion device is composed of a bellows, a duct, a fan, etc. .
When cutting the glass piece, start the fan, open the air pipe shutter, use the fan to blow the air in the bellows, the air in the bellows overflows from the small hole in the tabletop, form an air cushion, lift the glass piece, so as to adjust the position of the glass piece and Avoid scratching the glass surface, close the air duct shutter when cutting the glass, and the glass piece falls on the table.
The cutting bridge of the automatic glass cutting machine, which is a metal structure bridge spanning the cutting table, which supports the metal rail on the longitudinal outer side of the cutting table. The guide rail on the side of the surface has a cutter wheel for cutting and cutting glass. The material of the cutter wheel is made of cemented carbide. It is mounted on a rotating shaft, which is mounted on the end of the cylinder rod of the cylinder. The shaft and the cylinder are equipped with The cutting starts.
The computer control box, which is an operation cabinet that automatically controls the equipment. During operation, it is only necessary to input the data of the number, standard, shape and the like of the cut glass into the computer through the keyboard, and the cutting machine can complete the cutting operation according to the computer instruction.
The closed end zipper category includes various closed end zipper products, metal Zippers, nylon zippers, plastic steel zippers, invisible zippers, etc.The lower end of this zipper is linked together by the bottom stop and cannot be separated. It is suitable for jeans zippers, backpack zippers, tent zippers and other applications.
closed end metal zip, waterproof closed end zip, closed zipper, closed bottom zipper
RR Zipper , https://www.arrzipper.com