Brief analysis of jade husk

2. The jade husk is a remnant of magma metamorphism and is formed by weathering. Its composition is mostly iron and sodium, and some substances such as silicon or quartz and mudite. The leather shell is the internal manifestation of the interior, the basis for people to judge the texture, and the symbol for distinguishing the origin.

翡翠皮壳

The sand on the skin is thick and thin, thick and thin. The thick ones are like comb teeth, the thin ones are like plates, the thick ones are more than one centimeter, and the thin ones are like a piece of paper. No matter what kind of performance, the jade skin shell can directly reflect the texture of the bottom chapter, so there are often comments that the sand is turned over well and the sand is not turned well. Although the window is opened without cutting, the performance of the sand shell can be judged and speculated. This is the thick meat of the sand, fine sand and fine meat, sand and meat, sand pilaf, sand meat, sand and meat.

The jade husk has almost all colors, such as purple, black, white, dark green, etc., and has a very close relationship with the interior, but red, brown, brown, etc., but there is no direct relationship with the interior. Because sand and color often resemble some substances in nature, people call it the sand shell of the same name. For example, there is a piece of water rust on the sand shell, which people call it water and sand. The rough skin is called rough stone, and the sand shell is called fine stone. The salt-like salt is called salt sand. A green hull like a frog is called a frog skin. Here are some of the more common different skins.

Elephant skin: It looks like an old elephant skin, light gray, wrinkled leather shell, and feels thorns when touched. This is a typical expression of weathering. The skin of this kind of skin is better, it is the original sand shell, and the translucent glass bottom is often seen after cutting, which is the superior in the leather shell.

Old bark: shaped like bark, yellowish brown, dry brown wrinkled, rough looking, feel thorny. After cutting, the white bottom is more common. Most of them contain positive color and can be gambling. This kind of leather shell is more common in the Da Makan area. Because Burma has a tree called Dneka by the locals, the bark is very similar to this kind of husk, so people also call it Dynakapi.

White sand skin: the sand on the skin is like salt, the stone is old, and there is white fog under the skin. It is mainly produced in the old field area of ​​the Marai field and the individual field of the new field. In addition, the white salt sand has no fog under the skin, and the sand is not divided into thin and weak. It is common to take off the white sand and have yellow sand, which is an illustration of the symbiosis between the secondary sand shell and the original sand shell. If there is green under the original sand shell, most of them are yang instead of yin, and the color is rich.

Yellow sand skin: sand grains like salt, deep yellow, old stone. Mainly produced in the old market. Other places have also produced, the most important distinction is that the sand has to be turned over and has a strong three-dimensional sense. After cutting, more white water bottom, color and green, is the best. If the sand on the skin is disorderly and uneven, there is no regular arrangement. Such a yellow sand has no fog layer, and most of them are the bottom of the sputum or the bottom of the bean.

White-gray skin: The sand is covered with a layer of lime powder. Brushing off this layer of white powder is white sand. This is the performance of surface weathering. It is more than the old-fashioned area, and most of them see the glass bottom after cutting.

Desalination: This is a double-layered sand shell, a typical species that is symbiotic with the primary sand shell and the secondary sand shell. There is another layer on the layer, the color is mostly white, and the second layer is yellow or red.

Old stone species, the main field is in Dongguo. After the yellow sand is cut, it is mostly white bottom and has a pea color. After the red sand is cut, it is more common to see the bottom, there is a positive color, but it is dark.

Black Ushapi: The color is grayish black, the sand has three kinds of coarse and medium fine, the thick one is more common as the coarse bean bottom, the thin one is more common as the fine bean bottom, only the middle one has the sputum bottom, and some are seen after cutting. Some see the color cast, there are white cat stools, and some have a blue taste. If it is the Ushapi in Pagan or Houjiangchang area, the fine bean base is mostly, the green yellow taste is sufficient; the Mohan and Nanqi field mouths are mostly sputum, and the green is blue. The Wusha from the four outlets all have wax shells, and those in other places have black waxes and wax shells are rare.

Rust skin: The rust skin is black and yellow. It can appear on sand shells of different colors. The strips are narrow and wide, some are sheet-like and some are blocky. If the rust shell is moderate, it will turn strong and regular, and the bottom and color will be good after cutting. It is not afraid of the bottom ash, but it is colorless. Once it is colored, the color must be green and water.

Iron sand: Iron refers to sand tight, more common to earth white, after cutting is a thin bean bottom or sputum bottom. This is a rare old species right.

Water turning over sand: It is more common for old stone species, the color is black and yellow, but the sand is generally not very good, because the field of water produced by this kind of water is relatively messy, the bottom water is general, the main difference is that there is on the skin. No water rust. Representatives are the muddy waters of Mamu Bay and Huika.

Red sand skin: color like Yang Meihong, also known as Yang Meisha. There are many places to produce such sand shells, such as the bridge, Xianggong, Da Makan, Poor, Mana, Mo Gedi, etc., medium stone species, more common cow blood fog, usually the bottom of the bean. If the brown betel nut rust appears on the shell, its color is very bad.

Bacon skin: The skin is shaped like bacon, hence the name bacon skin. The skin is thick and thin, the bottom of the seed is thick and thin, generally opaque, it is medium jade, and there are more outlets. Those with a green color are rare.

Tian chicken skin: the color is gray, the skin is fine and thin, and a small number of field chicken skin has a wax shell. Because it is applied to the sandless area, it is easy to fall off, and there are fewer those with green color. It is more common in the Houjiang area.

Yellow pear skin: pear yellow color, thin skin, you can see the color inside the light, after cutting, green yellow taste foot, bright and lively. It is the most representative block of Da Makan.

1. The skin of the artichoke: the skin is yellow and thin, and it is more common in the mountains and half. After cutting, it is translucent, and it is produced at the end of Da Makan and Mo Bang.

Bamboo leaf skin: color milky yellow and thin, high transparency, is a half-mountain and half-water stone. Green and green after cutting. It is very characteristic on the white water bottom.

Frog skin: The skin color is light green, there is no fog layer, and after cutting, the water is often short.

Flat-bed Machine Items

SUZHOU WINTEX TEXTILE CO.,LTD. , https://www.szwintextextile.com